The design of cone Crusher

cone Crusher are designed to impact on a rock particle placed between a fixed and a moving plate. The cone crusher faces of the plates are made of hardened steel. Both plates could be flat or the fixed plate flat and the moving plate convex. The surfaces of both plates could be plain or corrugated. The moving plate applies the force of impact on the particles held against the stationary plate. cone crusher Both plates are bolted on to a heavy block. The moving plate is pivoted at the top end or at the bottom end and connected to an eccentric shaft. In universal cone crusher the plates are pivoted in the middle so that both the top and the bottom ends can move.

The cone crusher are single or double toggle drives. The function of the toggle is to move the pivoted cone. The retrieving action of the cone from its furthest end of travel is by springs for small crushers or by a pitman for larger crushers. As the reciprocating action removes the moving cone away from the fixed cone the broken rock particles slip down, but are again caught at the next movement of the swinging cone and crushed. This process is repeated until the particles sizes are smaller than the smallest opening between the crusher plates at the bottom of the cone crusher. For a smooth reciprocating action of the moving cones, heavy flywheels are used in both types of  cone crusher.

Welcome to Yifan Machinery cone crusher website for the knowledge of the crusher.Here is our site editor free upload some of the information, if you want to learn more comprehensive the crusher product information and prices, you can give us a message in the comment box below. Every day we check for messages received your message back to you in the first time.Has received 1378, has completed Replies 1378, effective 1367.